For Testing branch circuits supplying bedrooms in single and multi-family dwellings protected by an arc fault circuit breaker.
|
Identifies the presence and counts the number ( up to four) of load coils on an active or inactive circuit.
|
Tests and maintains 10BASE-T and coaxial Ethernet networks consisting of CAT3, 4 and 5 cable. Tests include WireMap, TDR length, near-end crosstalk (NEXT) and attenuation to 16MHz, signal-to-noise ratio and noise. It diagnoses many common network...
|
Tests and maintains CAT 3, 4, and 5 Ethernet, 10BASE-T and Token Ring networks & stores and prints aotutest reports.
|
Detects and pinpoints wide range Voltage and Current with Sensitivity adjust. The only two-in-one current/voltage detector designed for electrical testing. Non-Contact AC Voltage detection from 12V to 600VAC. Non-Contact AC Current detection from 200mA...
|
Locates current in hidden wires and cables. Non-contact AC Current range is from 200mA to 1000A. Locates current flow even where voltage detectors cannot work. Detects through shielded wires, conduit, and metal circuit breaker or junction boxes.
|
Provides electricians with AC voltage indicating capabilities up to 1000 volts.
|
Test GFCI breakers for proper wiring and operation. Easy to read light indicators show common wiring problems. Confirm GFCI socket is wired for protection. GFCI circuit trips to confirm tester is working. For use on 110-125 V AC.
|
This popular tester has 5" insulated leads with tip prods for safe and easy testing of both AC and DC circuits - 80V AC to 600V AC or DC.
|
The pocket-sized voltage detector.
|
Voltage Range 50-1000 Volts AC. The AC Sensor is a hand held device for determining the presence or absence of 50-1000 volts AC in insulated wires, wall receptacles, fuses, junction boxes, switches, and other voltage carrying electrical systems. The AC...
|
|
|
|
Identifies faults in 3-wire, 125 VAC circuits.
|
|
|
Always on for faster, safer voltage testing. 2AC is the latest addition to the VoltAlert ac non-contact voltage tester family from Fluke. It is designed to be pocket-sized and easy to use. Just touch the tip to a terminal strip, outlet, or cord. When...
|
Always on for faster, safer voltage testing. 2AC is the latest addition to the VoltAlert™ ac non-contact voltage tester family from Fluke. It is designed to be pocket-sized and easy to use. Just touch the tip to a terminal strip, outlet, or cord. When...
|
The IntelliTweeze is a quick and easy way of testing and troubleshooting many types of components. With the use of only one hand, this lightweight unit will quickly measure resistance, capacitance, inductance, continuity and polarity.
|