This handy unit is a multi-purpose continuity tester and network identifier. It is a continuity tester for UTP, STP and flat sating cables with RJ45 terminations.
|
Identify connector and cable pin-out with true cable mapping, not pairing, for both patch cords and installed cables. Full-range continuity testing, line condition, signal tracing & wire identification with tone generator and tone probe cable tracer.
|
For Testing branch circuits supplying bedrooms in single and multi-family dwellings protected by an arc fault circuit breaker.
|
For testing four-pair data/voice cable links terminated with standard, modular 8-position RJ45-style jacks.
|
New! Use to identify various wiring faults in 10BASE-T and other four-pair, unshielded twisted pair (UTP) cables.
|
Quick verification of opens or shorts in either the conductor or the shield of coax cable with one button operation.
|
Tests and maintains 10BASE-T and coaxial Ethernet networks consisting of CAT3, 4 and 5 cable. Tests include WireMap, TDR length, near-end crosstalk (NEXT) and attenuation to 16MHz, signal-to-noise ratio and noise. It diagnoses many common network...
|
Tests and maintains CAT 3, 4, and 5 Ethernet, 10BASE-T and Token Ring networks & stores and prints aotutest reports.
|
Quickly and easily verifies the integrity of an Ethernet twisted-pair cabling installation with MicroMapper™, a compact, handheld cable tester and toner designed for network professionals.
|
Easy-to-use tester that can support Voice (RJ11), Data (RJ45) and Video (Coax F-Connector) cable verification.
|
Check speed and duplex... Only devices with matching speed and duplex work together.
|
Portable, Gigabit LAN analyzer helps network technicians and managers identify and solve problems faster.
|
Offers a new performance level for verification of wiring faults and configurations on your data cables.
|
The LanRoverPRO™ Tester/Analyzer is the high performance length measurement CAT 5 tester that identifies multiple faults clearly without interpretation, has one-ended testing with pre-test for fast result, clear wiremapping form displayed on 2-line, 16 ch
|
Used for installing and maintaining computer LANs running the TCP/IP protocol.
|
The CableTool Model CT50 uses TDR technology to quickly determine the distance to a cable fault (open or short) in feet or meters. There are over 60 pre-stored standard cable NVP values. The user can define and store up to four custom NVP values as well.
|
Provides LAN/Telecom installers and maintainers a tool to quickly test an unknown wall outlet and identify the type of circuit.
|
Test 2950 ft. of 4-pair cable at a time for opens, shorts, reversals, miswires and cross-twists with single button.
|
Tests standard PC Cables for continuity and wiring configuration. Unit tests any combination of DB9, 15, 25 (male or female), RJ11/45 telephone plugs, RG58/59/62 BNC connections, and Centronics 36.
|
Features easy method of isolating problems by checking if signals are being generated by computer or terminal equipment. Monitors the most commonly used RS-232 lines.
|
Protect your expensive LAN Tester -- checks LAN Lines (RJ-45) wired to 568 A/B standard for damaging telephone line current.
|
For 110-125 VAC receptacles. Detects common wiring problems in standard & Ground Fault Circuit Interrupter (GFCI) outlets.
|
Tests 5 types on cables (RJ-45, RJ-11, BNC, 1394, USB). One button test, ergonomic, portable handheld design, tests installed wiring or patch cables. Remote attaches to main unit, 600' test distance (RJ-45, RJ-11, BNC). Built-in battery test, LEDs...
|
|
|
|
Analog Meter Display for easier readouts. Frequency Range: 950MHz to 2050MHz. High input sensitivity through MMIC Technology.
|
These testers identify good or bad cables terminated in DecConnect or 2, 4, 6, 8 position modular connectors.
|
|
|
|
|
These LanMasters provide LAN installers and maintainers tools to quickly test Fast Ethernet (100baseTX) and Standard Ethernet (10baseT) links.
|
The first in a new line of Physical Layer Network Management Devices. Combines the functions of a high-end cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link co
|