Ideal for difficult-to-solder metals, but is not recommended for electrical applications due to its corrosive nature.
|
Track Solder pot impurities for conformance to federal and military specs
|
Ultrapure® is the industry standard for bar solder used in high tech electronic applications where a lower surface tension and hole filling ability are essential. Produced from the very best selection of virgin metals under extremely tight limitations, re
|
Ultrapure® is the industry standard for bar solder used in high tech electronic applications where a lower surface tension and hole filling ability are essential. Produced from the very best selection of virgin metals under extremely tight limitations, re
|
Use as the initial rinse, followed by water, to soften chloride residues resulting from soldering with organic or inorganic fluxes.
|
For automated wave or drag soldering processes. Residue can be removed completely without neutralizers in water. Complies with IPC-SF-818 Type H3C. Has improved stability in low temperature storage without performance loss. Reduced foaming in water...
|
For automated wave or drag soldering processes. Residue can be removed completely without neutralizers in water. Complies with IPC-SF-818 Type H3C. Has improved stability in low temperature storage without performance loss. Reduced foaming in water...
|
Original neutral pH fluxes designed for automated wave or drag soldering processes. Residue left after soldering can be removed completely without neutralizers in water. Complies with IPC-SF-818 Type H3C.
|
Developed to clean, remove oxidation, and activate metal or plated surfaces to facilitate soldering.
|
|
Quickly and precisely removes most conformal coatings including acrylic, urethane and silicones
|
Isopropanol 99% pure, anhydrous isopropanol is designed for all purpose cleaning.
|
99.8% pure anhydrous (containing the least water possible and no denaturant) isopropyl alcohol is excellent for tape head cleaning, defluxing, stencil cleaning, other light cleaning, and as a flux thinner. Avoid "bargain" alcohols for critical...
|
Wondermask WSOL is safe on precious metals and sensitive contacts.
|
Soldering Tip Cleaner and Stand: Made of low abrasive brass shavings with no water required. No temperature drop as with conventional sponges. Stainless steel holder and rubber base to prevent slipping.
|
A chloride-free, inorganic white powder rormuated to remove dross.
|
Designed for general soldering use, this flux self-neutralizes during the heat of soldering. Residue removal required if flux is not properly heated.
|
The high temperature, peelable temporary mask ideal for lead-fee applications.
|
The fastest, safest rosin flux desoldering braid for removing solder from printed circuit boards.
|
Gauge: 16. Diameter: .050". Tin/Lead Percentage: 60/40. Length: 6.5'.
|
An electronic quality rosin flux mixed with petroleum jelly.
|
The powerful flux remover for high temperature, lead-free flux removal.
|
The powerful flux remover for high temperature, lead-free flux removal
| |